The Laser Tools G4062 Eezibleed Kit is a revolutionary new way to bleed your car's brake system. It uses air pressure from a spare wheel to effortlessly bleed hydraulic systems. There are a number of adaptors available to fit most vehicles with screw cap reservoirs, and comprehensive instructions are included. The kit includes:

• Pressure bottle (for new brake fluid)
• Bottle cap assembly
• Bleed tube set
• Five cap and seal sets
• Brass reservoir cap fitting
• Two fibre washers
• Lock nut and hook

The Eezibleed Kit is a great way to save time and money when bleeding your car's brake system. It is easy to use and can be done by anyone with basic mechanical skills. The kit is also very affordable, making it a great value for money.

Here are some of the benefits of using the Laser Tools G4062 Eezibleed Kit:

• It can help you to bleed your car's brake system more easily.
• It can help to prevent damage to your car's brake system.
• It can save you time and money by making it easy to bleed your car's brake system yourself.

If you are not comfortable bleeding your car's brake system yourself, you can always take your car to a qualified mechanic. However, if you are confident in your abilities, the Laser Tools G4062 Eezibleed Kit can make the job much easier.

Here are some of the steps on how to use the Laser Tools G4062 Eezibleed Kit:

1. Remove the brake fluid reservoir cap.
2. Connect the Eezibleed Kit to the brake fluid reservoir.
3. Fill the pressure bottle with new brake fluid.
4. Attach the pressure bottle to the Eezibleed Kit.
5. Open the valve on the pressure bottle.
6. Allow the air pressure to bleed the brake system.
7. Once the brake system is bled, close the valve on the pressure bottle.
8. Remove the Eezibleed Kit from the brake fluid reservoir.
9. Replace the brake fluid reservoir cap.
10. Check the brake fluid level and add more fluid if necessary.

Here are some of the safety precautions to take when using the Laser Tools G4062 Eezibleed Kit:

• Always wear safety glasses when working with tools.
• Be sure to use the correct size tool for the job.
• Be careful not to over-tighten any bolts or nuts.
• Be sure to follow the instructions that come with the Laser Tools G4062 Eezibleed Kit.