Exterior Cleaning & Protection
MC-51 Rust Remover is a product designed around the needs of the end user. YOU CHOOSE HOW TO APPLY IT BASED ON YOUR SPECIFIC NEEDS.
Most rust removal products dictate the way to use them without really providing a convenient way to deal with rust. The application is limited to soaking, creating the need to use buckets or tanks to de-rust your parts. This limits the size of parts that can be treated. MC-51 Rust Remover will remove rust down to bare metal, eliminating the need for a soaking tank. MC-51 removes most types of oxidation and can be used to clean metals before painting. It will protect metal from rusting again for up to 3 months.
MC-51 RUST REMOVER APPLICATION METHODS
MC-51 IS LIGHTNING FAST:
MC-51 removes rust on contact. When applying MC-51, you will notice a rapid change in rust concentration and the bright metal will become visible below. In minutes your part will be free from rust (surface to medium rust, deeper rust will need a longer time). MC-51 outperforms the best selling safe rust removers.
MC-51 IS SAFE AND ECO FRIENDLY:
No special protection is required during the use of MC-51. MC-51 meets EU requirements for the Detergents Directive on Biodegradability EC648/2004.
- Safe on skin.
- Non-toxic, No bases, VOC's free.
- Environmentally friendly.
- Water soluble.
REDUCE YOUR RUST REMOVAL COSTS:
Whether you are an industrial, professional or private user, MC-51 covers your every day or challenging rust removal needs. It can replace all mechanical or chemical rust removal means you were previously using. With MC-51 Spray, you will not need any tooling, tubs, tanks, or labor. Due to its high speed, MC-51 will save you time and let you proceed with other tasks. No more overnight soaking and wasted time waiting to get a rust free part.
- No tools or machinery is required.
- No tubs or tanks.
- Labor free.
- Reduced treatment time.
- No danger waste disposal costs.
HOW TO USE IT:
You can apply MC-51 by spraying, wiping, or dipping. Spray: Apply MC-51 until the rusted surface is fully wet. Rust will immediately start to dissolve. Re-apply spray as needed until all the rust is completely removed. A light scrubbing will speed up the rust removal process. Wipe: soak a wipe with MC-51 solution and apply to the rusted area using a circular motion until all the rust is removed. Soak: fill a plastic tub with MC-51 and immerse the rusted part until it is fully covered. Remove the part once the rust is removed. Do not soak more than 8 hours or the part may turn a dark color and there may be a slight etching on the surface of the metal. After use: rinse with water. Dispose of MC-51 in accordance with local regulations.